Spark Plasma Sintering (SPS) is a tool/technique to consolidate and densify materials starting from powders. SPS uses pulsed DC currents of up to 4000 A to activate the consolidation and reactionsintering of materials. For this reason, it is sometimes referred to a 鈥渇ield-assisted sintering.鈥 The main advantage of SPS over other consolidation methods is its ability to preserve the nanostructure features of composites. In addition, it is used for the densification of a broad range of novel metallic alloys, semiconductors and ceramics.
Specifications and capabilities of GTAT SPS
- Sintering temperatures up to 2000掳C.
- Heating rates up to 1000掳C/min.
- Typical sample size of 10 mm or 20 mm diameter. Samples up to 40 mm diameter are possible.
- Pressures from 5 MPa to 60 MPa; can be controlled to 卤0.2 MPa.
- Sample can be pressed in vacuum (~10-5 Torr) or Ar atmosphere.
- Data acquisition: Temperature, ram position, and pressure are monitored during the run. Can also acquire current, voltage, ambient pressure (vacuum).
- DC pulse width can be adjusted from 4 ms to 999 ms.
- Ram position can monitored with 0.02 mm accuracy and resolution.
User RatesRates will be based on an hourly or per
sample basis and will be decided after
consultation with the customer.
sample basis and will be decided after
consultation with the customer.
Contact UsDr. Viktor Poltavets
Email: vpoltave@uno.edu
Email: vpoltave@uno.edu
Sample Data
